FWS1800ss GARBAGE COMPACTOR

Purpose
The FWS1800ss Garbage Compactor is used for the volume reduction of mixed Garbage, being compacted into either a heavy duty plastic bag or a strong non-synthetic box. Mixed Garbage can be taken as follows: Cardboard/Paper - Aluminium - Plastic - Food - Cloth - Wood - Glass - Other.The operation of the Compactor is not adversely effected if the Garbage is wet
(up to 10% water by weight).

 Identity
The major components of the Garbage Compactor are a hydraulic pump / motor,pressure switch , transformer , control module, sterilization lamp and air filtration unit.

 Services
 Required Electrical power at 380 /  440 V, 60 Hz , 3 phase, 3-wire.

 Design and Performance Data
 Construction: Mainframe - High Tensile Steel
 External panels - 304 Stainless Steel

 Watertightness Standard
 The upper service compartment enclosure is to IP55 standard  (spray-proof).

 Weight
 Shipping 280 kg

 Dimensions
 Height - Cabinet 1717.55mmC/w
 mounting feet 1806.45mm
 Width 624.84mm
 Depth 553.97mm
 Floor space 0.36m2
 Floor space (service door open) 0.72m2
 Size of loading chamber opening (Stainless Steel) 527 x 380mm
 Cube size 510 x 450 x 420mm
 Cube size (compacted) 0.099m3

 Space Required
 Appox. 0.313m2

 Performance Data
 Compaction force 6250 kg
 Motor /Pump Unit 1/2 hp
 Cycle time 18 - 22 seconds
 Volume : Approx 1.1 C.Y. (1.683 ) of loose dry waste @ 20/1  Compaction ration  (compaction variations on types of waste)

 Weight of Compacted Garbage
 Approx. 0.06 C.Y. (46m3 15.87/45.4Kg) av. weight (wet waste  will weight more). A 'Full Loading Lamp' will let you know when  the compacted load is ready for removal (control of the waste  cube weight is made by adjustment to the Limit switch in the  upper chamber)

 Logistic Requirements
 Clean warm soapy water is required for cleaning the Compactor.